How Much Does Fencing Cost in the UK?
Typical price: £60 to £150 (close-board 1.8m, fitted, per metre; per metre and per panel). This guide uses 4 published 2026 sources and shows where they disagree.
Fencing prices at a glance
| What you are paying for | Price (per metre and per panel) |
|---|---|
| Close-board 1.8m, fitted, per metre | £60 to £150 |
| Lap or overlap panel, per metre | £40 to £75 |
| Composite fence, per metre | £120 to £200 |
| Per 6ft panel, fitted | £100 to £180 |
| Labour only, per metre | £15 to £30 |
| Removing an old fence, per metre | £10 to £25 |
Figures are November 2026 estimates from the sources listed below. Your own quote may be higher or lower.
What affects the price
- Type: lap panels are cheapest, close-board costs more, composite most.
- Height and length of the run.
- Posts: concrete posts last longer than timber.
- Removal of the old fence.
Regional differences
Fencers in London and the South East usually quote 15% to 25% above the national range. Prices also change with local demand, how easy it is to reach the job and the time of year, so use these ranges as a starting point rather than a fixed price.
Prices depend on height, post type and gravel boards. Check whether old fence removal is included.
How to pay less
- Measure the run before you ask for quotes.
- Agree who owns and maintains the boundary with your neighbour first.
- Choose treated timber and concrete gravel boards for longer life.
A worked example
If your quote for the main item (close-board 1.8m, fitted, per metre) lands at the middle of the range, that is about £105. A quote below £60 is worth questioning: ask what has been left out. A quote above £150 is not necessarily wrong, but ask for a breakdown and compare it with at least two other firms.
Why prices differ so much
The sources we reviewed do not always agree, and that is normal for fencing. Many guides are written by trade firms or lead-generation sites, and each defines the job a little differently: some include VAT, some leave out the preparation or making good, and some are averages of real quotes while others are estimates. In this guide the lowest figure listed is £10 (removing an old fence, per metre) and the highest is £200 (composite fence, per metre). Treat the range as the zone where most quotes fall, not as a promise. Outdoor jobs are affected by access, ground conditions and the time of year. Groundworks, waste removal and any council permits are the items most often left out of a cheap quote.
How to get an accurate quote
- Measure the area yourself before asking for quotes, so you can sanity-check the price per square metre.
- Ask whether excavation, drainage and waste removal are included.
- Check whether you need planning permission or a council permit.
- Get at least three quotes and compare the materials named in each.
- Ask for a guarantee in writing.
- Avoid anyone who knocks on the door offering a cheap deal today.
Frequently asked questions
How high can a garden fence be without planning permission?
Generally 2 metres at the back and 1 metre next to a road. Check with your council.
How long do fence panels last?
Treated timber panels last about 10 to 15 years. Composite lasts longer.
How much does fencing cost?
Typical prices run £60 to £150 (close-board 1.8m, fitted, per metre). See the table above for the full breakdown.
How much are fence panels?
Typical prices run £60 to £150 (close-board 1.8m, fitted, per metre). See the table above for the full breakdown.
Where do the figures on this page come from?
They come from MyBuilder fence installation cost, LESS fencing cost, BestBuilders fencing cost. All sources are linked at the bottom of the page.
Sources and method
- MyBuilder fence installation cost
- LESS fencing cost
- BestBuilders fencing cost
- Walls and Floors: fence panel costs
Page last updated November 2026. See our editorial policy and disclaimer.