How Much Does a New Driveway Cost in the UK?
Typical price: £45 to £100 (tarmac; per m2 installed). This guide uses 4 published 2026 sources and shows where they disagree.
Driveway prices at a glance
| What you are paying for | Price (per m2 installed) |
|---|---|
| Gravel | £30 to £70 |
| Tarmac | £45 to £100 |
| Block paving | £70 to £150 |
| Resin-bound | £60 to £180 |
| 50 m2 tarmac drive | £2,500 to £4,500 |
| Groundworks and excavation, extra | £30 to £50 |
Figures are November 2026 estimates from the sources listed below. Your own quote may be higher or lower.
What affects the price
- Surface: gravel is cheapest, tarmac and block paving cost more, and resin-bound costs most.
- Groundworks: digging out and laying a sub-base is a big part of the price.
- Drainage: front gardens over five square metres need permeable paving or a soakaway.
- Dropped kerb: if you do not already have one, your council charges for it.
Regional differences
London and the South East typically run 20% to 40% higher. Prices also change with local demand, how easy it is to reach the job and the time of year, so use these ranges as a starting point rather than a fixed price.
Check that a quote covers excavation, sub-base and drainage, because that is where quotes differ most. Large paved fronts need permeable surfacing or planning permission.
How to pay less
- Compare quotes that include excavation, sub-base and drainage.
- Choose permeable paving to avoid needing planning permission.
- Ask for a guarantee on the surface.
A worked example
If your quote for the main item (tarmac) lands at the middle of the range, that is about £73. A quote below £45 is worth questioning: ask what has been left out. A quote above £100 is not necessarily wrong, but ask for a breakdown and compare it with at least two other firms.
Why prices differ so much
The sources we reviewed do not always agree, and that is normal for driveway. Many guides are written by trade firms or lead-generation sites, and each defines the job a little differently: some include VAT, some leave out the preparation or making good, and some are averages of real quotes while others are estimates. In this guide the lowest figure listed is £30 (gravel) and the highest is £4,500 (50 m2 tarmac drive). Treat the range as the zone where most quotes fall, not as a promise. Outdoor jobs are affected by access, ground conditions and the time of year. Groundworks, waste removal and any council permits are the items most often left out of a cheap quote.
How to get an accurate quote
- Measure the area yourself before asking for quotes, so you can sanity-check the price per square metre.
- Ask whether excavation, drainage and waste removal are included.
- Check whether you need planning permission or a council permit.
- Get at least three quotes and compare the materials named in each.
- Ask for a guarantee in writing.
- Avoid anyone who knocks on the door offering a cheap deal today.
Frequently asked questions
Do I need planning permission for a driveway?
You do not if the surface is permeable or the rainwater drains to a lawn or border. Otherwise you may need planning permission for paving over more than five square metres of front garden.
How long does a driveway take to build?
Most driveways take three to five days.
How much is tarmac driveway?
Typical prices run £45 to £100 (tarmac). See the table above for the full breakdown.
How much does a resin driveway cost?
Typical prices run £45 to £100 (tarmac). See the table above for the full breakdown.
Where do the figures on this page come from?
They come from FMB: costs for a new driveway, Homebuilding driveway costs, MyBuilder driveway cost. All sources are linked at the bottom of the page.
Sources and method
- FMB: costs for a new driveway
- Homebuilding driveway costs
- MyBuilder driveway cost
- MyJobQuote resin driveway cost
Page last updated November 2026. See our editorial policy and disclaimer.